Sport Wall Pads

Ensure maximum safety and impact protection with sports wall padding, designed for gymnasiums, sports arenas, schools, and training facilities. These high-density foam wall pads absorb shock effectively, reducing the risk of injuries from high-speed impact. Lightweight yet durable, they deliver long-lasting protection while enhancing the look of any gym or sports environment.

Perfect for basketball courts, wrestling rooms, martial arts studios, and multi-sport facilities, this gym wall padding is essential for athlete safety and professional performance.

✅ High-impact foam wall padding absorbs shock to reduce injury risk
✅ Lightweight and easy-to-install gym wall pads
✅ Durable construction for long-term use
✅ Perfect for gyms, schools, and sports arenas

The closed-cell polyethylene foam in these gymnasium wall mats is engineered with individually separated air bubbles that form a firm, protective top layer. This design provides the heavy-duty, shock-absorbing properties needed for high-level athletic competition.

• Made out of 16 oz. reinforced vinyl.
• Antibacterial and Antifungal Vinyl
• Stain-resistant, anti-fungal and anti-bacterial, these tumbling mats are highly resistant to mildew, rot, and water and are free from any toxic material or chemicals.
• Constructed out of 1 3/8” cross-link foam, these gym mats offer heavy-duty impact-absorbing qualities.
• Backed with a 7/16” wafer board.
• Each wall padding gym panel measures 2’ x 6’. There is a 1” lip on the top and bottom where pads are screwed to the wall
• These safety wall pads are made from double-stitched heavy-duty vinyl with a nylon thread.
• The safety wall pads can be easily cleaned with mild soap and water.

Ensure your Sport Wall Pads are installed securely and correctly for maximum athlete protection and a professional finish. Follow these simple steps:

What You’ll Need:

• Level or laser guide

• Electric screwdriver or power drill

• Stud finder (for drywall installations)

• Screws appropriate to your wall type (wood screws for drywall studs, masonry anchors for concrete/brick walls)

• Optional: Liquid Nails or construction adhesive

• Pencil or painter's tape for marking

• Two people (recommended for safe and accurate installation)

Step 1: Mark a Guide Line

• Use a level or laser to draw a horizontal line marking the top edge of your wall pads.

• Choose your starting height (just above the baseboard or higher) based on your facility layout.

• This ensures a straight, consistent row of pads.

Step 2: Locate Wall Studs (If Applicable)

• Use a stud finder to locate and mark the studs along your guide line.

• Anchoring screws into studs ensures maximum stability.

• For masonry walls, skip this step and proceed with anchors suited for concrete or brick.

Step 3: Attach the Wall Pads

• (Optional) Apply small dollops of Liquid Nails adhesive to the back of each pad to help keep it flush.

• Align the top 1” lip of the pad with the guide line.

• Use your screwdriver to secure screws through the 1” lip at the top and bottom of each pad.

  • 2–3 screws per top and bottom edge is recommended.

• Make sure pads are tightly spaced to avoid gaps.

• If using multiple pads with graphics or logos, lay them out first to ensure correct visual alignment.

 Final Tips:

• If using Liquid Nails, wait 24 hours before heavy use to allow full adhesive curing.

• To clean, simply wipe the vinyl surface with mild soap and water.