Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
HSM120-STAIR-1138
Heavy item handling surcharge applied at checkout for this item.
Keeping the pathway up to your home or building can be crucial in creating a safe environment for your family and guests. Slip and fall accidents are one of the leading causes of injury during the winter and are only made worse by the conditions we face here in Canada.
The Hot Step Snow Melting Heated Mats are specifically designed to take a beating from the harsh weather and keep automatically melting snow so that you don’t have to get out a shovel and engage in hours of back-breaking labour.
Designed to keep your entrances, driveways, walkways, and stairs safe. These rubber heated mats are UV protected, and strong enough to handle the weight of cars.
Build your ideal Hot Step Snow Melting Heated Mats System today.
Hot Step Snow Melting Heated Mats require at least 1 GFCI Power unit to plug into your outlet at home. See more in the specifications.
Note: Hot Step Snow Melting Heated Mats is only compatible with this GFCI Power unit which is sold separately.
Mat Type | Size | Voltage | Wattage | Amperage |
Walkway Mat XL |
1500 x 1000MM 59.1” x 39.4" |
120V | 600W | 5.3A |
Walkway Mat | 1200 x 900MM 47.3” x 35.5" |
120V | 430W | 3.9A |
Passageway Mat | 1200 x 510MM 47.3” x 20.1" |
120V | 240W | 2.1A |
Doormat | 600 x 1010MM 23.7” x 39.8" |
120V | 240W | 2.1A |
Stair Mat | 270 x 960MM 10.7” x 37.8" |
120V | 90W | 0.8A |
BEFORE YOU START
1. Check that the delivery note is correct compared to what has actually arrived.
2. Perform a visual control
a. Visible damage on the cable
b. Visible damage on the plugs/packaging
c. Visible damage on the mat/power cable
ASSEMBLY OF HEATING MATS
Hot Step Snow Melting Heated Mats requires a GFCI Power Unit (sold separately). The GFCI Power Unit turns off the power if any of the electric current begins leaking to the ground. It is important to test the GFCI Power Unit each time the mat is installed and before use.
Here is all you need to do:
1. Locate the test and reset buttons on the Power Unit.
2. Plug the power cord into the outlet.
3. Alternately press the RESET and TEST buttons.
4. Each time you press the RESET button, the power light should turn on. If the light does not come on, make sure there is voltage at the outlet.
5. Each time you press the TEST button, the power light should turn off.
6. Leave the Power Unit with the light turned on. If the Power Unit does not operate as described above,do not use the mat. Call customer service at (800) 624-0041.
Power the Hot Step Snow Melting Heated Mats whenever there is a threat of snow or ice. It is a good idea to unplug it when there is no snow or ice. Before storing the mat, clean it with mild soap and water, and place it in the original packaging. Store the mat indoors after the winter season. It is important to store the mats immediately after the winter ends. Failing to do so may expose the mats to excessive summer UV sunlight, harming the mats over time.
Hot Step Snow Melting Mats are safe to place on a variety of surfaces, including:
1.) Is it safe to drive over the Hot Step Snow Melting Heated Mats?
The Hot Step Snow Melting Heated Mats Mats are very durable and will handle normal vehicular traffic in standard wintery environments. However, it is important to make sure the ground surfaces under the mats are clear of any sharp objects that could puncture the mat. If you have questions about the durability of our mats in your specific vehicular situation (i.e., many large trucks on a regular basis), please call HOTSTEP
technical support team at (800) 624-0041
2.) Why don’t the mats feel warm when I touch them?
When you turn on the mats, they may not feel
warm to the touch, but that’s ok. This is especially true when the air temperature outside is very cold. This is because the temperature of your hand is greater than the temperature of the mat. But if you are concerned, check to see that the light on the mat’s plug is illuminated. If it is, these mats are on and they’ll melt snow. If after the first snow fall it appears the mats are not melting snow, call our troubleshooting team at (800) 624-0041
3.) Are the power units waterproof?
The power unit on the mat is certified as “rainproof”, but it is not
submersible. Therefore, please be careful not to lay the mat’s power unit in an area that will collect a lot of water, such as a small ditch. While the mats themselves are very waterproof, the power unit, however, cannot be exposed to excessive amounts of water. It is the best to make sure the power unit hangs from the outlet in a vertical manner at least 18” from the ground. However, if the power unit will be laying in a horizontal manner on a sidewalk or ground, it is the best to wrap the power unit in a plastic bag to keep as much water away as possible. Do not make the plastic bag air tight, because it
is important to make sure any water that may get inside the bag has a way to exit. The purpose of the bag is to keep excessive amounts of water away
4.) Can I leave the mats on all the time?
Yes, you can run these mats all winter long without damaging
the mat, but your electricity bill will be higher than normal. It is the best to only use the mats when you are expecting snow. Alternatively, you can use any of our thermostat accessories to automate the operation of the mats. This will save your time and money and ensure that the mats turn on even if nobody is there to turn them on (like in the middle of the night)
5.) Can I place the mat on any surface?
Some surfaces (e.g., stamped concrete) have special coatings
or sealers that may get harmed if exposed to heat. If you have a surface that you think may have a special coating on it, you should put a thin heat blocker under the mats. This blocker can be in the form of plywood, outdoor carpet or turf, thin insulation, etc. Putting a heat blocker underneath the mats will force the heat upwards away from the sidewalk, preserving the special coating on the sidewalk.
6.) Can I place my Hot Step Melting Mat on an artificial turf?
Yes, the Hot Step Snow Melting Mats are safe to place on artificial turf.
Designed for ultimate
snow-free areas ensuring safe and clear pathways, drastically reducing the risk of slip and fall accidents.
Invest in reliability and safety and let the Hot Step Snow Melting Heated Mats safeguard your surroundings effortlessly.
Embrace winter without worry with our Hot Step Snow Melting Heated Mats. Made with durable rubber, these mats are a testament to durability and reliability, ensuring clear, safe paths even in the harshest Canadian winters.
The innovative design automatically melts snow, eliminating the need for laborious shoveling and preventing slip-and-fall accidents.
UV-protected to withstand intense weather conditions, they confidently bear the weight of vehicles, ensuring optimum functionality year-round.
Choose Hot Step Snow Melting Heated Mats for a seamless blend of safety and convenience, combined to keep your entrances, driveways, and walkways consistently clear and secure.
✅Residential Entrances
✅Commercial Building Walkways
✅Driveways
✅Stairs
✅ Emergency Exits
Hot Step Snow Melting Mats work by heating to just above freezing, melting snow on contact to keep walkways, driveways, and stairs clear and safe. Made from durable, weather-resistant materials, they’re designed for tough winter conditions. The mats can be easily connected to cover large areas, offering efficient, energy-saving snow and ice removal for both residential and commercial use.
Hot Step Snow Melting Mats are designed with easy-to-use male and female connectors, allowing you to daisy chain mats together and create custom pathways. Unlike other mats, our connectors snap together effortlessly, even in cold conditions or with gloves on.
Our mats can melt 1.5 to 2.5 inches of snow per hour. However, performance depends on factors such as pre-existing snow or ice and the ambient temperature.
Our mats can melt 1.5 to 2.5 inches of snow per hour. However, performance depends on factors such as pre-existing snow or ice and the ambient temperature.
Yes, the mats are waterproof and made to withstand harsh weather. Constructed from heavy-duty rubber and equipped with watertight electrical connections, they’re safe to use outdoors, even in rain and snow, all winter long.
Absolutely. Hot Step Snow Melting Mats feature a durable, heavy-duty rubber construction with an enclosed heating film, making them strong enough to support the weight of cars, trucks, and SUVs.
Yes, our mats are specifically designed for stairs and other uneven surfaces, reducing the risk of dangerous slips and falls.
We put it right outside our back door and it really works! Definitely melts any snow or ice that goes directly on the mat (but not around it).
Very happy with our purchase. We used the stair mats for the steps on our hot tub. I would highly recommend this product and Mat Supplier Group. Great service.
Fantastic mats. I bought the automatic snow sensor and wired the mats works perfectly. I use it on my wood deck for the dog to get out and front steps.
great
love these mats for outside my door to hot tub!!!